Home > Exhibition > Content

Micro gear motor installation and maintenance requirements

May 14, 2019

Before using the micro gear motor, you need to determine whether the appearance of the equipment is damaged or leaking. Please confirm the voltage of the geared motor first. A voltage regulator can be added when the voltage is unstable. Confirm that the specifications of the geared motor are in accordance with the design specifications.

 

The micro-gear motor confirms the fixed base to a certain extent, so that it can avoid loosening when the drive is running. If sprocket, pulley, coupling and other accessories are used, it must be installed according to relevant regulations. Lubricated butter has been placed in the body of the geared motor, and the lubricant is not replaced for 12,000 hours.

 

When the micro gear motor drive is running, its rated current must not exceed the motor marked current value. To a certain extent, it is necessary to pay attention to the surrounding temperature, humidity, pH and other problems. If it is not installed, maintained or operated in the correct way, it may cause serious damage to the geared motor.

 

When repairing and disassembling the micro gear motor, it is necessary to confirm that the external power supply is completely disengaged from the geared motor. The safety device must be installed to ensure absolute operational safety. The motor needs a grounding wire. Please refer to the power distribution regulations. Please confirm that all the installed parts and transmission parts are fixed correctly, then start the geared motor.

 

http://www.huaxing-motor.com