For the miniature DC deceleration motor in the choice of time, we must first note that it refers to its protection level. For the miniature DC deceleration motor housing protection level, in terms of a large extent, it is necessary to pay attention to should be to meet the micro-motor installation location environment requirements. Next, we will focus on the miniature DC deceleration motor rated voltage and frequency.
The rated operating voltage and frequency of the miniature DC deceleration motor should be consistent with the voltage and frequency of the power supply we are using. The rated power of the motor should be matched with the driven mechanical power as much as possible.
Next, let's take a brief look at the repair and handling of common mechanical faults for miniature DC deceleration motor. On the motor shaft out of bending, but it is not the degree of bending when we are in fact can be directly on the use of polished way to dress; when it's bent more than 0.2mm when we actually That is, can directly borrow the press to dress, after the dressing, we actually have to pay attention to the surface should be polished, restore the original look can be; when it is relatively large curvature, and there is no way When the dressing, we actually should pay attention to the timely replacement.
Miniature DC deceleration motor shaft wear, when the journal wear is not large, we will be coated with a layer of chromium in the journal, followed by, in fact, it should be careful to wear to the size we need.
Of course, the miniature DC deceleration motor shaft wear more serious when we can actually use surfacing, followed by, that is, will choose to trim the window to the standard size; when the miniature DC deceleration motor shaft wear There is no way to dress up the point when we actually should pay attention to the timely replacement, to avoid unnecessary danger caused by it.
If you are interested in our products, please contact us!
Wuxi Huaxing Motor Switch Factory
Contact: Xu Ziye